12 simple hairstyles for long hair

2024 Author: Malcolm Clapton | [email protected]. Last modified: 2023-12-17 03:44

These options are suitable both for a holiday and for every day.

Low structural beam

What do you need

• Comb;
• curling iron for curling hair;
• regular elastic band;
• invisible hair.

How to do your hair

First curl your hair slightly. Then separate equal strands on the sides. The middle section of the hair should be larger than the rest.

Tie this part into a ponytail, lifting your hair up slightly for volume. At the end, pull them out not completely to get a kind of bundle.

Pull the strands out slightly at the top of your head. Wrap the tip of the tail around the bun from right to left through the top. Secure the hair with invisibility to the left of the bun and above it.

Raise the remaining tail up and also secure it with an invisible one.

Pull the left side of your hair back and release small strands in front. Twist the hair slightly over the top of the bun, pull a little and pin to the right of it.

Attach the right side of your hair to the bun in the same way.

Bring the remaining tail under the bundle and secure it with invisible ones, leaving several hanging strands below.

Tweak the bun if necessary to make it look more relaxed.

Loose hair with voluminous braids

What do you need

• Hair curling iron;
• comb;
• invisible hair;
• invisible elastic bands.

How to do your hair

Curl your hair first. Then make a comb on top: first separate a small strand at the forehead, lift it up and actively walk along the roots with a thin comb up and down. Fold the worked part over your face. Comb the other strands in the same way, up to about the middle of the head.

Throw your hair back again. Comb them lightly, gather in the middle and secure with invisible hairpins, placing the hairpins crosswise.

Braid a braid on one side under the fleece. Pull the strands out to make it look more voluminous. Secure with an elastic band. The length of the braid should be such that it covers the invisible ones from the previous step. Braid the hair on the other side of your head in the same way.

Place one braid over the invisibility braids and the other just below the first. Fix it with invisible ones.

Tighten the ponytails so that the strands do not stand out from the rest of the hair.

Low bun of twisted strands

What do you need

• Comb;
• invisible elastic bands;
• hairpins - invisible.

How to do your hair

Gather your hair around the edges and make a ponytail out of it in the middle. Straighten the strands slightly on the sides.

Divide all hair into three sections. Locks should remain under the ponytail. Tuck the sides forward for convenience. Divide the middle strand in half.

Work on the center section of the hair first. Twist one strand, transfer it to the second and twist it too. Twist the strands together. Pull your hair out for a fuller look. Secure the edge with an elastic band.

Twist the rest of your hair in the same way. Secure them with rubber bands.

Wrap the middle strand behind the base of the ponytail and pull it down. Repeat the same for the remaining ponytail.

Thread the other two strands in the same way. Secure the hair that has been knocked out from the bottom with invisible ones.

Low ponytail with knots

What do you need

• Comb;
• regular elastic band;
• invisible hair;
• invisible elastic band;
• decorative hairpin - optional.

How to do your hair

Pull your hair into a low ponytail. Separate a small strand on the side and wrap a regular elastic band with it. Secure the tip with an invisible under the tail.

Separate the sides by one strand. Bring the right to the left above the tail.

Pass the left strand under the resulting loop and tighten the knot.

Cross the ends behind the tail, bring it forward and tie it in a knot again.

Add some ponytail hair to the ends.

Cross the strands again behind the tail and tie in a knot in front.

Make a few more knots in the same way and secure with an invisible elastic band.

Pull the strands out gently for volume. Decorate the base of the ponytail with a wide hair clip if desired.

Voluminous hairstyle with a low bun

What do you need

• Comb;
• invisible elastic bands;
• regular elastic band;
• bobby pins or hairpins are optional.

How to do your hair

Use an invisible elastic to pull the top of your hair into a ponytail.

Gather the strands in the middle of the head and connect them with an invisible elastic band to the upper ponytail. Pull your hair out slightly between the elastic bands and at the sides.

In the same way, lower one more tail and extend the strands too.

Pull a regular elastic over the remaining hair at the level of the last invisible elastic, as shown in the photo.

Then, without stretching the strands, twist the elastic band and put it on the resulting bundle. The video below has all the details.

Then wrap the elastic band around the bun again to keep it tighter. If necessary, fix it with invisible pins or hairpins.

Three fish tails hairstyle

What do you need

• Comb;
• invisible elastic bands;
• invisible hair.

How to do your hair

Separate a small strand at the top of the side and braid a fishtail that is not too long. We talked about how to form it in a separate article. The video below also has a visual instruction. In the process of weaving, stretch the strands to make the braid more voluminous. Tie it with an elastic band.

Make the exact same braid on the other side.

Fix one fishtail with the invisibility about the middle of the head, as shown in the photo.

Take a lock under the base of this braid, twist it and secure it in the same place as the fishtail.

In the same way, pin another braid and another twisted strand.

In the middle, separate a small section of the hair and start braiding another fishtail.

Then pick up the strands on both sides and add them to the braid.

Continue braiding the fishtail until you run out of hair. Along the way, slightly stretch the strands for volume. At the end, tie the braid with an elastic band.

Loose hair with twisted strands and a small bun

What do you need

• Comb;
• curling iron for curling hair;
• hairpins - invisible.

How to do your hair

Curl your hair. Grab two small strands on one side and twist them together. Secure with invisibility, as shown in the photo.

Twist the strands on the other side and also fix it with invisibility next to the first element.

Gently pull down the edges of the strand to add volume.

Take a section of your hair in the middle and fold it in half.

Twist the resulting loop and thread the tip of the strand there. If you are at a loss, watch the video tutorial below.

Add volume to the small bun by pulling the hair out from underneath.

Fix the beam with invisibility on all sides.

Hairstyle from three bundles

What do you need

• Comb;
• invisible elastic bands;
• barrette;
• invisible hair.

How to do your hair

Tie the top of your hair into a ponytail. You can leave a couple of falling strands in front.

For a while, fix the ponytail with a hair clip so that it does not get in the way. Make another ponytail in the middle, leaving part of the hair at the bottom. Remove the second ponytail and form a third underneath.

Remove the hairpin and release the tails. Holding the base of the first one from below, wind it from right to left over the top.

Then make a loop from the right side of the hair and pass the tip of the ponytail through it. Fix the beam with invisible ones. The video below shows the entire process in detail.

Connect the tip of the first tail to the second. Fold the base inward as shown in the photo.

Run the rest of your hair from left to right over the top.

Pull the strands into the resulting loop and secure the bundle with invisible ones.

Connect the tip of the second tail and the third. Pull your hair from right to left over the top and pass it through the loop. Fix the third beam with invisible ones.

Fold the remaining hair under the last bun and also secure it with invisible ones.

"Crown" of twisted strands

What do you need

• Comb;
• invisible elastic bands;
• invisible hair;
• curling iron for curling hair.

How to do your hair

Part your hair in half. Secure one part with an elastic band so that it does not interfere.

Separate a small strand from the front from the second half. Bring your hair back to the other side and also divide it in half.

Twist the strands together, simultaneously twisting each one separately. Tie with an elastic band.

Remove the elastic from the other section and release a bit of hair in the front for beauty. Twist the part freed from the elastic in the same way as the first.

Arrange the strands crosswise as shown in the photo.

Bring the ends forward, bending your hair around your head. Firmly fix the strands with invisible ones.

Curl the strands hanging down in front.

Low twisted tail

What do you need

• Comb;
• invisible elastic band.

How to do your hair

Part your hair in half at the bottom.

Tie a knot out of your hair: turn the right side over the left and thread the second under the first. Tighten. The video below shows the process in detail.

Pull the strands down and twist each strand slightly.

Place the right side over the left and twist them again.

Continue twisting your hair and secure it at the end with an elastic band.

Slightly straighten the strands at the top and in the ponytail for a fuller look.

Low voluminous tail

What do you need

• Comb;
• invisible elastic bands.

How to do your hair

Divide your hair into three sections. The middle should be larger than the side ones.

Gather the center section of the hair at the bottom with an elastic band. Above it, use your fingers to part the hair in half and thread the ponytail inside. See the video below for details.

Do the same and thread the side ponytails.

Extend the right tail over the middle tail.

Then pass the left ponytail in the same way. Gently pull the strands of hair in and above the ponytails to create a fuller look.

Pull out the two back ponytails behind the front and secure with an elastic band.

Divide the tail in half, which is now at the back. Pull your hair forward as well and secure with an elastic band.

Continue to do the ponytails almost all the way to the end of your hair.

Pull out the strands so that the "braid" acquires volume. Try to cover the elastic with your hair while doing this.

Very simple low beam

What do you need

• Comb;
• regular elastic band.

How to do your hair

Pull your hair into a low ponytail. At the end, pull them out partially, leaving a loop at the bottom.

Roll the tip of the tail to one side, covering the elastic.

Hide the end of the tail under the elastic.

Pull your hair slightly over the top of the bun for a fuller look.